about DiamondBrite Marine
Purchasing a boat is a very expensive investment. Keeping it in top condition not only makes ownership more enjoyable, it also safeguards that investment for many years to come. The Diamondbrite Marine range has been wholly developed to protect all types of vessel from the very toughest conditions – as well as making cleaning and maintenance responsibilities much less time-consuming.
Diamond rite Marine has been developed to provide long lasting protection in the harshest environments. Originally developed in Sweden it is more than just a polish it is a blend of high grade natural waxes and high grade nano ceramic which leaves a tough yet invisible coating.
Diamondbrite has been formulated into a 2 stage process so that each product compliments the next and builds up to create a tough durable glaze.
Once treated with Diamondbrite Marine all you need to do to maintain the appearance of your boat is wash down regularly using Diamondbrite Shampoo and Conserver. Your boat will look as good new, thereby improving its resale value. Another major benefit of Diamondbrite's high gloss finish is the ease with which dirt and grime is washed off the paintwork making the boat much easier to clean.
Both the shampoo and conserver are supplied when the boat is Diamondbrited in the first instance. Further supplies of these and other Diamondbrite after care products can be obtained from www.diamondbriteshop.co.uk.
Diamondbrite is a two stage process; the first stage cleans, prepares and adds the initial first stage waxes to the painted surface ready for the second stage application.
Stage 1 is a solvent based liquid, containing two different types of Wax.
This is a 2 step process. The first uses the Solvent to clean the paintwork of all contaminants, removing any airborne particles, dust, fallout and any pre-delivery wax residues that need to be removed before sealing the paintwork with the Diamondbrite protective film.
The second utilises the waxes to add the first stage of the protective coating. Stage 1 contains a blend of a hard wax with a high melting point that can withstand high ambient temperatures and also be highly polished to give a deep shine, with a soft hydrocarbon wax that has good lubrication properties to aid the application of the second stage.
Once applied, the coating is left to adhere to the painted surface, the high polarity waxes become bonded with the surface paintwork. The wax dries slightly giving an opaque look, but not becoming fully cured, and not being removed until after the second stage is applied.
Stage 2 is a blend of high percentage natural waxes and a high grade nanoceramic, which leaves a tough yet flexible coating.
This product is the concentrated part of the process. It is an O/W (Oil-in-water) emulsion containing the main part of the protective coating and is applied directly onto the semi-cured Stage 1. It combines with the Stage 1, and using polarity it adheres to the top surface of the paintwork.
As the Stage 2 is applied, the high grade Ceramic fills and covers all of the minute pits and troughs that are associated with paint finishes and also covers any other blemishes within the surface paintwork, blending it all together. The waxes then adhere to the surface, sealing the paintwork and leaving it slippery and smooth to the touch.
The finished surface offers Hydrophobic properties that repel everyday dirt & grime and also bead water spray and rain off quickly, with a highly reflective surface to guard against paint fade caused by Ultra Violet rays.
The concentrated blend of Carnauba waxes adheres to the paintwork, but also allows the protective coating to expand and contract, in-line with the ambient pressure and temperature. As Carnauba wax isn’t mineral based it is also more Eco-friendly.
Conserver is recommended for use as a monthly top-up onto the already highly protected surface. It is an emulsion containing a very hard wax with a high melting point, and is to be used by the customer in a wash bucket after cleaning the vehicle with a mild Car Shampoo.
This product adds a further wax coating, with great hydrophobic protection through continued use.
As Conserver also contains a traditional Ceramic it can also be used neat to remove any residual imperfections after application.
Jewelultra Ltd believes in continued improvement, and regularly has the Diamondbrite paint protection system independently tested by a well known and respected test house.
The results of these independent tests show that Diamondbrite continuously out performs all of its well known competitors.
Test results are available on request.
Magnified Paint Cross Section reveals pitted pores of the the gel coat
Salt and dirt gathers in pores. Nitrates attack outer edges.
Stage 1 cleanses and fills pores in boat's paintwork leaving a smooth finish.
Stage 2 bonds with Stage 1 to create a hard protective skin while also leaving a smooth high lusture finish. Rain and dirt now run off easily.
Any marine vessel can be washed, treated, glossed and valeted using the Diamondbrite range. As well as improving the general appearance and performance of boats, it makes maintenance tasks a cinch – and far less time-consuming than ever before.
Provides enduring protection against damaging and harmful marine elements, and leaves a highly glazed and durable film. Developed for use on gel coat and all marine craft including painted / non painted and varnished surfaces, application is quick and easy with removal by hand.
Marine High Gloss Long Lasting Boat Polish restores light fading and removes minor blemishes and scuff marks. For heavily oxidised surfaces and stains, you can restore finish with the Diamondbrite Marine Compound Paste.
For continual protection regularly wash using Diamondbrite Marine Rinse Gloss. This can be applied and removed in heat and direct sunlight conditions, and is safe to use on interior and exterior surfaces including chrome, rubber, smooth plastics, wood and aluminium.
Unlike other traditional wash and wax products, Marine Wash & Wax contains a higher concentration of wax to maintain your boat’s appearance to the very highest standards. Simply by washing your boat or yacht, exterior surfaces are offered protection at the same time.
With regular use, Marine Wash & Wax ensures continuous protection – particularly when used in conjunction with Diamondbrite Marine Polish.
Safe to use on all surfaces, Marine Wash & Wax cleans and leaves a protective film in one operation. It does not contain harmful detergents, which can cause long term damage to certain areas of a boat.
A fast and effective non-foaming gloss, Diamondbrite Marine Rinse Gloss maintains your boat’s appearance via a water repellent film that remains in place – even when mixed with wash water. Suitable for use on all exterior areas, it removes light surface dirt and grime. After applying Marine Long Lasting, High Gloss Boat Polish, Marine Rinse Gloss can be used for regular washing.
Maintains and restores the original appearance of leather, conserving its supple and flexible properties to prevent drying and cracking. The Marine Leather Feed is ideal for use on both new and used interior and exterior surfaces. Treating leather periodically maintains its durability, and protects against harsh marine conditions.
Marine Waterscreen leaves a non-stick coating, causing water and rain to form into droplets and clear from all glass surfaces. It is ideal for all glass surfaces including windscreens, Perspex and clear plastics both inside and out. One application should last up to 6 months.
Road grime, salts traffic film and tar
Acid Rain and other atmospheric pollutants
Bird Dropping damage